- Width: 8.5mm (~0.33 inches)
- Weight: ~52 grams (~1.85 ounces) varies slightly by size
- Sizes: Available in 4 standard diameters (40mm, 45mm, 50mm, 55mm).
Notes: (1)You may notice a hair-thin, slightly lighter-colored line on the inside of the ring at the bottom. This is where the ring was suspended during the coating process, and is not a defect. (2) If you're between sizes, we recommend you go down to the smaller size.
How to measure for the perfect fit
Gather Your Supplies. You'll need a piece of string and a ruler to get your measurement. We recommend using a string instead of trying to use a soft tape measure.
Measure. Wrap the string around your penis and behind your balls. Mark the string where it meets. You want the ring quite snug. You should be able to just fit a finger between your skin and the string when you're soft. And it should be comfortably tight when you're hard so that you can't fit in a finger. You may want to measure both soft and hard to double-check your size.
Determine Your Size. Measure the distance from the end of the string to the mark. This is the circumference. Use the handy table below to get your size.
|13.0-14.5cm (5.0-5.75in)||40mm (~1.6in)|
|14.5-16.5cm (5.75-6.25in)||45mm (~1.8in)|
|16.5-18.0cm (6.25-7.0in)||50mm (~2.0in)|
|18.0-19.5cm (7.0-7.75in)||55mm (~2.2in)|
If you're used to round cock rings, you should go down 5mm (~.2 in) from your round ring size. Our keyhole shape fits a bit looser than a round ring with the same diameter.
Tips For Measuring
- Be sure to pull the string as tight as you'd like your ring to be.
- If you're between sizes, go down to the smaller size.
- Measure twice! Due to the intimate nature of these rings, we can't accept returns or exchanges.